Cbr - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
cbr
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
cbr pcr
no cbr
Command introduced in JunosE Release 7.1.0.
ATM VC Class Configuration mode added in JunosE Release 7.3.0.
In ATM VC Configuration mode, configures the constant bit rate (CBR) service category
on an ATM PVC. You must specify the peak cell rate (PCR) value. The cbr command is
valid only for data PVCs; you cannot use this command for control (ILMI or signaling)
PVCs. The no version restores the default service category, unspecified bit rate (UBR)
without a PCR.
In ATM VC Class Configuration mode, configures the CBR service category as part of a
VC class definition that you assign to an ATM data PVC. The no version restores the
default service category, UBR without a PCR, in the VC class.
pcr—Peak cell rate, in Kbps, in the range 1–149760 (for OC3 ATM modules) or 1–599040
(for OC12 ATM modules)
ATM VC Configuration, ATM VC Class Configuration
Chapter 4: C Commands
349
Advertisement
Table of Contents
