Cache Entries - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

cache entries

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
cache entries entryNumber
no cache entries
Command introduced in JunosE Release 8.1.0.
Sets the number of entries in the aggregation cache. The no version sets the number of
entries to the default value.
entryNumber—Number of entries in the aggregation cache in the range 1024—524288;
default value is 4096
Flow Cache Configuration
Chapter 4: C Commands
347