Bundled-Group-Id - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

bundled-group-id

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] bundled-group-id bundledGroupID
Command introduced before JunosE Release 7.1.0.
Assigns a bundled group identifier when no endpoint discriminator is available for bundled
sessions using an L2TP destination host profile. When multiple tunnel-service modules
are installed in a router that is deployed as an LNS and the tunnel sessions carry MLPPP,
the router can use the bundled group identifier when selecting a tunnel-service module
for bundled sessions. The no version restores the default value, no assigned bundled
group identifier.
NOTE: We recommend that you assign a bundled group identifier for bundled
sessions only when you are certain that endpoint discriminators are
unavailable to identify bundle membership.
bundledGroupID—Identifier for a bundled group in the range 0–4294967295
L2TP Destination Profile Host Configuration
Chapter 3: B Commands
343