Ip Service Profile Configuration Mode; Ipsec Ca Identity Configuration Mode; Ipsec Identity Configuration Mode - Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual

System basics configuration guide software for e series broadband services routers
Table of Contents

Advertisement

JUNOSe 11.1.x System Basics Configuration Guide

IP Service Profile Configuration Mode

In this mode, you can specify the information that the system uses in creating IP
service profiles.
From Global Configuration mode, type ip service-profile and the service profile
name, and press Enter.
host1(config)#ip service-profile radius
host1(config-service-profile)#?

IPSec CA Identity Configuration Mode

In this mode, you can specify the information that the system uses in online certificate
requests and during negotiations with its peers.
From Global Configuration mode, type ipsec ca identity, and press Enter.
host1(config)#ipsec ca identity
host1(config-ca-identity)#?

IPSec Identity Configuration Mode

In this mode, you can specify the information that the system uses in offline certificate
requests and during negotiations with its peers.
From Global Configuration mode, type ipsec identity, and press Enter.
98
Accessing Command Modes
default
Set a command to its default(s)
do
Run an exec mode command (alias command run)
domain
Configure a username domain
exit
Exit from the current command mode
help
Describe the interactive help system
include
Configure an attribute to be included in a username
log
Configure logging settings
macro
Run a CLI macro
no
Negate a command or set its default(s)
password
Configure a user password
run
Run an exec mode command (alias command do)
sleep
Make the Command Interface pause for a specified duration
user-name
Configure a user name
user-prefix
Configure a username prefix
crl
Certificate Revocation List checking
default
Set a command to its default(s)
do
Run an exec mode command (alias command run)
enrollment
Configure enrollment parameters
exit
Exit from the current command mode
help
Describe the interactive help system
issuer-identifier
issuer identifier
log
Configure logging settings
macro
Run a CLI macro
no
Negate a command or set its default(s)
root
Specify root proxy
run
Run an exec mode command (alias command do)
sleep
Make the Command Interface pause for a specified

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1

Table of Contents