Bridge1483 Service-Profile - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

bridge1483 service-profile

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] bridge1483 service-profile profileName
Command introduced in JunosE Release 9.0.0.
Assigns the specified IP service profile to the interface profile from which a dynamic
bridged Ethernet interface is created. The IP service profile must be defined in the default
virtual router. The no version removes the IP service profile assignment from the interface
profile.
profileName—Name of the IP service profile; maximum of 32 alphanumeric characters
Profile Configuration
Chapter 3: B Commands
309