Bgp Advertise-Inactive - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

bgp advertise-inactive

Syntax
Release Information
Description
Mode
274
[ no ] bgp advertise-inactive
Command introduced before JunosE Release 7.1.0.
Enables the advertisement of inactive BGP received routes—routes that are considered
by BGP to be " best routes" and therefore are present in the IP forwarding table, but that
are not being used for forwarding. The no version restores the default state of normal
route advertisement, whereby BGP advertises received routes only if they are in the IP
forwarding table and are being used to forward traffic, or if synchronization is enabled.
Router Configuration
Copyright © 2010, Juniper Networks, Inc.