Baseline Ipv6 - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

baseline ipv6

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
baseline ipv6 [ udp ]
Command introduced before JunosE Release 7.1.0.
Sets the baseline on general IPv6 traffic statistics as the current value. Use the udp
keyword to set a baseline for UDP statistics. There is no no version.
udp—Sets a baseline for UDP statistics
Privileged Exec
Chapter 3: B Commands
243