Baseline Ip Vrrp - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

baseline ip vrrp

Syntax
Release Information
Description
Mode
242
baseline ip vrrp
Command introduced before JunosE Release 7.1.0.
Sets a statistics baseline for VRRP statistics. The router implements the baseline by
reading and storing the statistics at the time the baseline is set and then subtracting this
baseline whenever baseline-relative statistics are retrieved. There is no no version.
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.