Baseline Ip Tunnel-Reassembly - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

baseline ip tunnel-reassembly

Syntax
Release Information
Description
Mode
240
baseline ip tunnel-reassembly
Command introduced in JunosE Release 8.0.0.
Sets a statistics baseline for tunnel reassembly statistics on the current virtual router.
The router implements the baseline by reading and storing the statistics at the time the
baseline is set and then subtracting this baseline whenever you retrieve baseline-relative
statistics. There is no no version.
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.