Baseline Atm Vp Interface - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
baseline atm vp interface
Syntax
Release Information
Description
Options
Mode
216
baseline atm vp interface atm interfaceSpecifier vpi
Command introduced in JunosE Release 7.1.0.
Sets a statistics baseline for an ATM virtual path (VP) interface. The router implements
the baseline by reading and storing the statistics at the time the baseline is set and then
subtracting this baseline whenever baseline-relative statistics are retrieved. There is no
no version.
interfaceSpecifier—ATM interface specifier; see Interface Types and Specifiers on
page 5
vpi—Virtual path identifier of the PVC. The numeric range depends on the line module
capabilities and current configuration.
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?