Aps Working - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

aps working

Syntax
Release Information
Description
Options
Mode
122
aps working [ 1 ]
no aps working
Command introduced before JunosE Release 7.1.0.
Configures an interface as a working interface. The no version removes the configuration.
1—Channel number that identifies the working interface; because the working interface
is always assigned channel number 1, this is the only valid option
Controller Configuration
Copyright © 2010, Juniper Networks, Inc.