Link Selection - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
link selection
Syntax
Release Information
Description
Options
Mode
1220
link selection { primary | secondary }
no link selection
Command introduced before JunosE Release 7.1.0.
Disables redundancy on a GE I/O module by allowing operation on the specified port
only. The no version restores the default situation, in which port redundancy is enabled.
primary—Allows operation on only the primary port
secondary—Allows operation on only the redundant port
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?