Show Aaa Server - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show aaa server

Displays information about a particular AAA server or AAA servers.
show aaa server [server_name]
Syntax Definitions
server_name
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
If you do not include a server name in the syntax, information for all servers displays.
•
To display information about an ACE server, use ace as the server_name. Information for ACE is only
available if ACE is specified for Authenticated Switch Access through the aaa authentication
command.
Examples
-> show aaa server
Server name = ldap2
Server type
Host name 1
Retry number
Timeout (in sec)
Port
Domain name
Search base
Server name = rad1
Server type
IP Address 1
IP Address 2
Retry number
Timeout (in sec)
Authentication port = 1645,
Accounting port
Server name = Tpub1
Server type
IP Address 1
Port
Timeout (in sec)
Encryption enabled
page 43-56
The server name, which is defined through the aaa radius-server or
aaa ldap-server commands or automatically set as ace for ACE servers.
= LDAP,
= ors40535,
= 3,
= 2,
= 389,
= manager,
= c=us,
= RADIUS,
= 10.10.2.1,
= 10.10.3.5,
= 3,
= 2,
= 1646
= TACACS+,
= 10.10.5.1,
= 3,
= 2,
= no
OmniSwitch 6250 CLI Reference Guide
AAA Commands
November 2009