Configuring The Monitor Port For The Local Mirroring Group; Displaying And Maintaining Port Mirroring - H3C SR6600-X Configuration Manual

Configuring the monitor port for the local mirroring group

To configure the monitor port for a mirroring group, use one of the following methods:
• Configure the monitor port for the mirroring group in system view.
Assign a port to the mirroring group as the monitor port in interface view.
•
Configuration restrictions and guidelines
When you configure the monitor port for a local mirroring group, follow these restrictions and guidelines:
A mirroring group contains only one monitor port.
•
• Use a monitor port only for port mirroring, so the data monitoring device receives only the mirrored
traffic.
Configuring the monitor port in system view
Step
1. Enter system view.
2. Configure the monitor port for
a local mirroring group.
Configuring the monitor port in interface view
Step
1. Enter system view.
2. Enter interface view.
3. Configure the port as the
monitor port for a mirroring
group.

Displaying and maintaining port mirroring

Execute display commands in any view.
Task
Display mirroring group information.
Command
system-view
mirroring-group group-id
monitor-port interface-type
interface-number
Command
system-view
interface interface-type
interface-number
mirroring-group group-id
monitor-port
Command
display mirroring-group { group-id | all | local }
205
Remarks
N/A
By default, no monitor port is
configured for a local mirroring
group.
Remarks
N/A
N/A
By default, a port does not act as
the monitor port for any local
mirroring groups.