Description
Use the lacp port-priority command to set the LACP priority of a port.
Use the undo lacp port-priority command to restore the default.
The default LACP priority of a port is 32768.
Examples
# Set the port LACP priority of GigabitEthernet 2/0/1 to 64.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] lacp port-priority 64
lacp period short
Syntax
lacp period short
undo lacp period
View
Ethernet interface view
Default Level
2: System level
Parameters
None
Description
Use the lacp period short command to set the LACP timeout interval on a port to the short timeout
interval (1 second).
Use the undo lacp period command to restore the default.
The default LACP timeout interval is the long timeout interval (30 seconds).
Examples
# Set the LACP timeout interval on port GigabitEthernet 2/0/1 to the short timeout interval (1 second).
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] lacp period short
lacp system-priority
Syntax
lacp system-priority system-priority
undo lacp system-priority
View
System view
Default Level
2: System level
9-16