Display Atm Pvc-Info - H3C MSR810 Command Reference Manual

Field
PVC State
Input: 0 packets, 0 bytes, 0 errors
Output: 0 packets, 0 bytes, 0 errors
Output queue
OAM cells received
F5 Loopback
F5 AIS
F5 RDI
OAM cells sent
F5 Loopback
OAM cell drops

display atm pvc-info

Use display atm pvc-info to display PVC information.
Syntax
display atm pvc-info [ interface interface-type { interface-number | interface-number.subnumber }
[ pvc { pvc-name | vpi/vci } ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type { interface-number | interface-number.subnumber }: Specifies an interface
by its type and number. Both ATM interfaces and ATM subinterfaces are supported.
pvc: Displays information about a PVC.
pvc-name: Specifies a PVC by its name, a c ase-sensitive string of 1 t o 15 c haracters, excluding
slashes (/) and hyphens (-). For example, neither 1/20 nor a-b is a valid PVC name.
Description
PVC state:
• UP—The following states are up:
State of the ATM interface to which the PVC belongs.

Shutdown state.

OAM state.

• DOWN—One or more of the following states is down:
State of the ATM interface to which the PVC belongs.

Shutdown state.

OAM state.

Counts of received packets, bytes, and packet errors.
Counts of transmitted packets, bytes, and packet errors.
QoS packet output queue information of the PVC.
Number of received OAM cells.
Number of received F5 Loopback cells.
Number of received AIS cells.
If the AIS alarm state is not supported, this command displays only
the number of AIS cells, rather than the AIS alarm state in the OAM
AIS State field.
Number of received RDI cells.
If the RDI alarm state is not supported, this command displays only
the number of RDI cells, rather than the RDI alarm state in the OAM
RDI State field.
Number of transmitted OAM cells.
Number of transmitted F5 Loopback cells.
Number of dropped OAM cells.
202