Display Snmp-Agent Trap-List; Display Snmp-Agent Usm-User - H3C S3100 Series Command Manual

Hide thumbs Also See for S3100 Series:

Table of Contents

display snmp-agent trap-list

display snmp-agent trap-list

Use the display snmp-agent trap-list command to display the modules that can generate traps and

whether the sending of traps is enabled on the modules.

If a module contains multiple submodules, the trap function of the entire module is displayed as enabled

as long as the trap function of any of the submodules is enabled.

Related commands: snmp-agent trap enable.

# Display the modules that can generate traps and whether the trap function is enabled on the modules.

<Sysname> display snmp-agent trap-list

configuration trap enable

flash trap enable

standard trap disable

system trap enable

oadp trap disable

Enable traps :4; Disable traps 1

In the above output information, enable indicates that traps are allowed to be generated on the module,

and disable indicates that traps are not allowed to be generated on the module.

By default, the modules that can generate traps are allowed to generate traps. If you do not need traps

of some modules, you can use the undo snmp-agent trap enable command to disable the trap

function of the specific modules.

display snmp-agent usm-user [ engineid engineid | username user-name | group group-name ]*

engineid: Engine ID, a string of 10 to 64 hexadecimal digits.

user-name: SNMPv3 username, a string of 1 to 32 characters.

Table of Contents