Display Snmp-Agent Group - H3C SR6600 Command Reference Manual

Storage-type: nonVolatile
Community name: userv1
Group name: testv1
Storage-type: nonVolatile
Table 22 Command output
Field
Community name
Group name
Acl
Storage-type
Related commands
snmp-agent community
•
snmp-agent usm-user { v1 | v2c }
•

display snmp-agent group

Use display snmp-agent group to display information about an SNMP group, including the group name,
security model, MIB view, and storage type.
Syntax
display snmp-agent group [ group-name ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Description
Displays the community name created by using the snmp-agent
community command or the username created by using the
snmp-agent usm-user { v1 | v2c } command.
SNMP group name:
•
If the community is created by using the snmp-agent community
command, the group name is the same as the community name.
•
If the community is created by using the snmp-agent usm-user { v1
| v2c } command, the name of the group to which the user belongs
is displayed.
Number of the ACL that controls the access of the NMSs in the
community to the device.
Only the NMSs with the IP addresses permitted in the ACL can access
the device with the community name.
Storage type:
•
volatile—Settings are lost when the system reboots.
•
nonVolatile—Settings remain after the system reboots.
•
permanent—Settings remain after the system reboots and can be
modified but not deleted.
•
readOnly—Settings remain after the system reboots and cannot be
modified or deleted.
•
other—Any other storage type.
98