Ftp Upgrade Failure; System Software Image File Missing Errors - H3C SR6604 Installation Manual

Failed to write data into storage device, maybe no enough space on device
•
The file to be downloaded is not found.
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait...
File not found.
•
The configuration of the network port is incorrect.
Can't connect to the remote host
Solution
To resolve the issue:
1. Delete some files in the CF card or use a new CF card so that enough space is available for the
system software image.
2. Type the correct file name.
3. Configure the network port correctly, and make sure the network port is up and you can
successfully ping the TFTP server from the network port.
4. If the issue persists, contact H3C Support.

FTP upgrade failure

Symptom
Start the router, and upgrade the software through FTP. The following problems might occur:
•
The CF card has no enough space.
227 Entering Passive Mode (192,168,1,10,10,204)
150 "xxx" file ready to send (xxx bytes) in ASCII mode
FTP: Error Writing Local File(Screen).
•
The file to be downloaded is not found.
227 Entering Passive Mode (192,168,1,10,10,203)
550 Error: File xxx does not exist
FTP: Error Writing Local File(Screen).
•
The configuration of the network port is incorrect.
FTP: Unrecognized host or wrong IP address!
Solution
To resolve the issue:
1. Delete some files in the CF card or use a new CF card so that enough space is available for the
system software image.
2. Type the correct file name.
3. Configure the network port correctly, and make sure the network port is up and you can
successfully ping the FTP server from the network port.
4. If the issue persists, contact H3C Support.

System software image file missing errors

Symptom
When none of the main, backup, and secure system software image files exists, the system displays
the following information at startup:
BootWare Validating...
Application program does not exist.
8-90