Connecting An E3/T3 Cable; E3/T3 Cable Overview; Connecting A Serial Port Cable; Overview - H3C SR6616 Installation Manual

Connecting an E3/T3 cable

As a best practice, install a special lightning protector at the input end of the E3/T3 cables to protect
them against lightning strikes more efficiently when they are routed outdoors.

E3/T3 cable overview

You can use an E3/T3 interface cable to connect the MIM-1CE3, MIM-1CT3, and MIM-1T3-V2
modules.
Figure 55 E3/T3 cable
Connecting an E3/T3 cable
Connect the SMB connector of an E3/T3 cable to the Tx port on the interface module and the
1.
other end to the Rx port on the device to be connected.
Connect the SMB connector of another E3/T3 cable to the Rx port of interface module and the
2.
other end to the Tx port on the device to be connected
Figure 56 Connecting an E3/T3 cable

Connecting a serial port cable

Overview

You can use a serial port cable to connect to the MIM-2SAE/MIM-4SAE/MIM-8SAE module. Select a
serial port cable according to the link type.
49