17.5
Interrupt Requests
There are six interrupt requests in this module; transmit data empty, transmit end, receive data full,
NACK detection, STOP recognition, and arbitration lost. Table 17.3 shows the contents of each
interrupt request.
Table 17.3 Interrupt Requests
Interrupt Request
Transmit data empty
Transmit end
Receive data full
STOP recognition
NACK detection
Arbitration lost
Abbreviation
Interrupt Condition
TXI
(TDRE = 1)
TEI
(TEND = 1)
RXI
(RDRF = 1)
STPI
(STOP = 1)
NAKI
{(NACKF = 1) + (AL = 1)}
(TIE = 1)
•
(TEIE = 1)
•
(RIE = 1)
•
(STIE = 1)
•
(NAKIE = 1)
•
Rev. 1.00, 09/03, page 505 of 704