Initial
Bit
Bit Name
Value
3
2
WD
1
WA
0
SF
Rev. 1.00, 09/03, page 548 of 704
R/W
Description
Unused
Returns 0.
R/W
Program Data Address Detect
When the address in the flash memory area is specified
as the start address of the storage destination of the
program data, an error occurs.
0: Setting of program data address is normal
1: Setting of program data address is abnormal
R/W
Program Address Error Detect
When the following items are specified as the start
address of the programming destination, an error occurs.
•
When the programming destination address in the
area other than flash memory is specified
•
When the specified address is not in a 128-byte
boundary (The lower eight bits of the address are
other than H'00 and H'80.)
0: Setting of programming destination address is normal
1: Setting of programming destination address is
abnormal
R/W
Success/Fail
Indicates whether the program processing is ended
normally or not.
0: Programming is ended normally (no error)
1: Programming is ended abnormally (error occurs)