Basic Instruction Formats; Table 2.10 Block Data Transfer Instructions - Renesas H8S/2437 Hardware Manual

Table 2.10 Block Data Transfer Instructions

Instruction Size
EEPMOV.B —
EEPMOV.W —
2.6.2

Basic Instruction Formats

The H8S/2600 Series instructions consist of 2-byte (1-word) units. An instruction consists of an
operation field (op), a register field (r), an effective address extension (EA), and a condition field
(cc).
Figure 2.11 shows examples of instruction formats.
Function
if R4L ≠ 0 then
Repeat @ER5+ → @ER6+
R4L–1 → R4L
Until R4L = 0
else next;
if R4 ≠ 0 then
Repeat @ER5+ → @ER6+
R4–1 → R4
Until R4 = 0
else next;
Transfers a data block. Starting from the address set in ER5, transfers
data for the number of bytes set in R4L or R4 to the address location
set in ER6.
Execution of the next instruction begins as soon as the transfer is
completed.
Rev. 1.00, 09/03, page 41 of 704