Renesas H8S/2437 Hardware Manual page 317

Bit Bit Name Initial Value R/W
3 OS3 0
2 OS2 0
1 OS1 0
0 OS0 0
Note: * Only 0 can be written to clear the flag.
• TCSRY
Bit Bit Name Initial Value R/W
7 CMFB 0
6 CMFA 0
Description
R/W Output Select 3, 2
R/W Specify how the TMO1 pin output level is to be changed
by compare-match B of TCORB1 and TCNT1.
00: No change
01: 0 is output
10: 1 is output
11: Output is inverted (toggle output)
R/W Output Select 1, 0
R/W Specify how the TMO1 pin output level is to be changed
by compare-match A of TCORA1 and TCNT1.
00: No change
01: 0 is output
10: 1 is output
11: Output is inverted (toggle output)
Description
R/(W)* Compare-Match Flag B
[Setting condition]
When the values of TCNTY and TCORBY match
[Clearing condition]
Read CMFB when CMFB = 1, then write 0 to CMFB
R/(W)* Compare-Match Flag A
[Setting condition]
When the values of TCNTY and TCORAY match
[Clearing condition]
Read CMFA when CMFA = 1, then write 0 to CMFA
Rev. 1.00, 09/03, page 279 of 704