Table of Contents
Advertisement
The start address of the programming destination must be at the 128-byte boundary. If this
boundary condition is not satisfied, an error occurs. The error occurrence is indicated by the WA
bit (bit 1) in FPFR.
Initial
Bit
Bit Name
Value
31 to 0 MOA31 to
MOA0
(b) Flash Multipurpose Data Destination Parameter (FMPDR: General Register ER0 of CPU):
FMPDR sets the start address in the area which stores the data to be programmed to the user
MAT. When the storage destination of the program data is in flash memory, an error occurs. The
error occurrence is indicated by the WD bit in FPFR.
Initial
Bit
Bit Name
Value
31 to 0 MOD31 to
MOD0
Rev. 1.00, 09/03, page 546 of 704
R/W
Description
R/W
Store the start address of the programming destination
in the user MAT. The consecutive 128-byte programming
is executed starting from the specified start address of
the user MAT. Therefore, the specified programming
start address becomes a 128-byte boundary and bits
MOA6 to MOA0 are always 0.
R/W
Description
R/W
Store the start address of the area which stores the
program data for the user MAT. The consecutive 128-
byte data is programmed to the user MAT starting from
the specified start address.
Advertisement
Table of Contents
