Aaa Authorization Config-Commands - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

aaa authorization config-commands

Syntax
Release Information
Description
Mode
36
[ no ] aaa authorization config-commands
Command introduced before JunosE Release 7.1.0.
Reauthorizes the use of Global Configuration commands. This command is enabled by
default when the aaa authorization commands command is executed. The no version
disables AAA configuration command authorization.
NOTE: Using the no version can potentially reduce the amount of
administrative control on configuration commands.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.