Clear Ip Tunnel-Routes - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

clear ip tunnel-routes

Syntax
Release Information
Description
Options
Mode
402
clear ip tunnel-routes [ vrf vrfName ] { * | ipAddress ipMask }
Command introduced in JunosE Release 7.1.0.
Clears and then refreshes a specified route or all dynamic routes from the tunnel routing
table of the virtual router or a specified VRF. There is no no version.
vrfName—Name of the VRF context from which routes are to be cleared
*—Clears all dynamic routes
ipAddress—IP address prefix for routes that are cleared; in 32-bit dotted-decimal format
ipMask—Mask of the IP address prefix for routes that are cleared; in 32-bit
dotted-decimal or /N format
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.