Deleting All Bulkstats Configurations; Monitoring Collection Statistics - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM BASICS CONFIGURATION GUIDE 2010-10-04 Configuration Manual

Deleting All Bulkstats Configurations

no bulkstats

Monitoring Collection Statistics

show bulkstats
Copyright © 2010, Juniper Networks, Inc.
Collectors modified to use per virtual router collection or configured after a collector
has started have a time delay until an active collector starts again.
Example
host1(config)#bulkstats virtual-router-group collector 2 routerISP3
Use the no version to prevent bulkstats from being reported for virtual router groups.
See bulkstats virtual-router-group.
Although individual bulkstats commands allow you to disable or delete a specific bulkstats
parameter, the CLI also allows you to remove all bulkstats configurations from the router
at one time.
Use to remove all bulkstats configurations from the router at one time.
Example
host1(config)#no bulkstats
See no bulkstats.
To view the parameters the router uses to collect statistics, use the following show
bulkstats commands.
To include or exclude lines of output based on a text string that you specify, use the
output filtering feature for show commands. For details, see "Command-Line Interface"
on page 27.
Use to display the bulk statistics data collection configuration.
Field descriptions
AdminStatus—Administrative status of the bulk statistics application
OperStatus—Operational status of the bulk statistics application, enabled or disabled
Interface Description Setting—Method used to encode the ifDescr object: common,
proprietary, industry-common
File Format—End of the line format in bulkstats files, carriage return and line feed
(CR+LF) or LF
Current Time—Current system time used to compare with the collection stop/start
time
Intervals—Number of times the bulk statistics collector has cycled through a collection
Chapter 4: Configuring SNMP
193