JunosE 11.3.x Command Reference Guide A to M
bulkstats interface-type
Syntax
Release Information
Description
Options
Mode
334
[ no ] bulkstats interface-type interfaceType [ interfaceSpecifier ]*
[ collector collectorIndex ]
Command introduced before JunosE Release 7.1.0.
mplsL2shim, mplsMajor, and mplsMinor keywords added in JunosE Release 8.2.0.
Configures the interface type on which you want to collect statistics. The no version
deletes the interface type from bulkstats collection.
interfaceType—One of the following interface types for which you can collect statistics:
ATM, ATM 1483, Ethernet, Frame Relay, Frame Relay subinterface, Cisco HDLC, IP,
MPLS minor, MPLS major, MPLS shim, PPP, VLAN subinterface
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
collectorIndex—Number in the range 1–65535 that identifies the particular data collector.
Always specify this option if you defined more than one collector.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.