Bridge Aging-Time - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

bridge aging-time

Syntax
Release Information
Description
Options
Mode
Related
Documentation
314
bridge { bridgeGroupName | vplsName } aging-time seconds
no bridge { bridgeGroupName | vplsName } aging-time
Command introduced before JunosE Release 7.1.0.
vplsName variable added in JunosE Release 7.1.0.
Sets the aging time of a dynamic (learned) entry in the forwarding table of a bridge group
or VPLS instance. The aging time is the length of time, in seconds, that an entry can
remain in the forwarding table. An entry expires from the forwarding table when it reaches
the specified aging time. The no version restores the default value, 300 seconds.
bridgeGroupName—Name of a bridge group specified with the bridge command
vplsName—Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
seconds—Aging time in the range 10–1000000 seconds
Global Configuration
Configuring Optional Attributes for VPLS Instances in the JunosE BGP and MPLS
Configuration Guide
Copyright © 2010, Juniper Networks, Inc.