Boot Force-Backup - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

boot force-backup

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] boot force-backup
Command introduced before JunosE Release 7.1.0.
Forces the router to use the backup software release file or router configuration file on
the next boot. The no version sets the router to use the default release or configuration
file on the next boot.
NOTE: After the router has used the backup settings, the no boot
force-backup command is the only way to get the router to use the default
settings again.
Global Configuration
Chapter 3: B Commands
301