Bgp Confederation Peers - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
bgp confederation peers
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
bgp confederation peers { autonomousSystem [ autonomousSystem ]* |
filter-list filterListName }
no bgp confederation peers [ autonomousSystem [ autonomousSystem ]* |
filter-list filterListName ]
Command introduced before JunosE Release 7.1.0.
Specifies the sub-ASs that belong to a confederation by listing individual AS numbers
or by reference to an AS-path access list (the filter list). If the remote AS of a peer appears
in the list of sub-AS numbers or in the filter list, then the peer is considered to be in the
same confederation. The no version removes individually specified sub-ASs, all sub-ASs
specified by the filter list, or all sub-ASs from the confederation.
autonomousSystem—AS number in the range 1– 4294967295
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
filterListName—Name of an AS-path access list; a string of up to 32 characters
Router Configuration
Chapter 3: B Commands
281
Advertisement
Table of Contents
