Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide A to M
baseline tcp
Syntax
Release Information
Description
Options
Mode
270
baseline [ ip | ipv6 ] tcp [ vrf vrfName ] [ localAddress localPort remoteAddress remotePort
]
Command introduced in JunosE Release 7.2.0.
ip keyword made optional in JunosE Release 7.2.0.
ipv6 keyword added in JunosE Release 7.2.0.
Sets a baseline for all TCP statistics or for only IPv4 or IPv6 TCP statistics. The router
implements the baseline by reading and storing the statistics at the time the baseline is
set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
There is no no version.
ip—Implements a baseline for only IPv4 statistics
ipv6—Implement a baseline for only IPv6 statistics
vrfName—Name of the VRF; string of 1–32 alphanumeric characters
localAddress—Local IP or IPv6 address on the router
localPort—Local TCP port number on the router
remoteAddress—IP or IPv6 address of remote router
remotePort—TCP port number on remote router
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
