Baseline Local Pool - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

baseline local pool

Syntax
Release Information
Description
Mode
252
baseline local pool
Command introduced before JunosE Release 7.1.0.
Sets a statistics baseline for the router local address pool statistics. The router implements
the baseline by reading and storing the statistics at the time the baseline is set and then
subtracting this baseline whenever baseline-relative statistics are retrieved. There is no
no version.
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.