Udp Details; Udp Table Details - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - SNMP AGENT GUIDE REV 1 Manual

36 U RFC1213-MIB
SING THE

UDP Details

UDP Table Details

For example, sample output may include:
The UDP details includes:
Table 3-8 UDP Details
S.No UDP Details
1. udpInDatagrams
2. udpNoPorts
3. udpInErrors
4. udpOutDatagrams Specifies the total number of UDP datagrams sent from
For example, sample output may include:
The UDP Table details includes:
Table 3-9 UDP Table Details
UDP Table
S.No Details
1. udpLocalAddress
STRM SNMP Agent
Description
Specifies the total number of UDP datagrams delivered to
UDP users.
Specifies the total number of received UDP datagrams for
which there was no application at the destination port.
Specifies the number of received UDP datagrams that
could not be delivered for reasons other than the lack of
an application at the destination port.
this entity.
Description
Specifies the local IP address for this UDP listener. If a
UDP listener is willing to accept datagrams for any IP
interface associated with the node, the value 0.0.0.0 is
used.