Atm Atm1483 Subscriber - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

atm atm1483 subscriber

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
atm atm1483 subscriber upperInterfaceType { user | user-prefix } userName
domain domainName [ { password | password-prefix }
password ] [ no-authenticate ]
no atm atm1483 subscriber upperInterfaceType
Command introduced before JunosE Release 7.1.0.
Configures a local subscriber (when one cannot be obtained externally, as in PPP) for a
dynamic upper interface encapsulation type configured over a dynamic ATM 1483
subinterface. A subscriber supports authentication and configuration from the RADIUS
server. The no version removes the subscriber.
upperInterfaceType—One of the following dynamic encapsulation types:
bridgedEthernet
ip
user—Employs the username as specified
user-prefix—Appends the interface physical location to the username
userName—RADIUS username
domainName—Domain name
password—Employs the password as specified
password-prefix—Appends the interface physical location to the password
password—RADIUS password
no-authenticate—Disables authentication
Profile Configuration
Chapter 2: A Commands
157