Aps Unidirectional - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

aps unidirectional

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] aps unidirectional
Command introduced before JunosE Release 7.1.0.
Configures the APS/MSP group to operate in unidirectional mode, the default setting.
The no version configures the APS/MSP group to operate in bidirectional mode.
Controller Configuration
Chapter 2: A Commands
121