Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide A to M
aps group
Syntax
Release Information
Description
Options
Mode
116
aps group groupName
no aps group
Command introduced before JunosE Release 7.1.0.
Assigns an interface to an APS/MSP group. The no version removes a group of APS/MSP
interfaces.
groupName—Name of the APS/MSP group to which the active and standby interfaces
belong; string of up to 32 characters
Controller Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
