Append-After - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

append-after

Syntax
Release Information
Description
Options
Mode
112
append-after indexNumber next-address ipAddress [ [ mask ] ipMask ] [ loose ]
Command introduced before JunosE Release 7.1.0.
Adds a next hop after a particular index in the MPLS explicit path. The sequence numbers
for existing hops after the index adjust automatically. There is no no version.
indexNumber—Number of a node in an ordered set of abstract nodes
ipAddress—Address of the next hop
ipMask—[ not currently used ] mask for the next adjacent address
loose—Indicates the node is not necessarily directly connected (adjacent) to the
previous node in the path. If loose is not configured, the configuration defaults to strict.
Strict indicates that the node is directly connected to the previous node.
Explicit Path Configuration
Copyright © 2010, Juniper Networks, Inc.