Aaa Service Accounting Interval - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
aaa service accounting interval
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
aaa service accounting interval period
no aaa service accounting interval
Command introduced in JunosE Release 9.0.0.
Specifies the default accounting interval used for services on the virtual router—the
Service Manager application uses this setting for RADIUS-initiated services when no
value is specified in the Service-Interim-Acct-Interval VSA (Juniper VSA 26-140). The no
version restores the default setting of 0, which turns off interim accounting for services
associated with users attached to this virtual router.
NOTE: This command and the aaa user accounting interval command replace the
deprecated aaa accounting interval command, which may be removed completely in
a future release.
period—Accounting interval in minutes in the range 10–1440, which sets the time period
between accounting updates for services associated with users on this virtual router;
0 is the default
Global Configuration
Chapter 2: A Commands
57
Advertisement
Table of Contents
