Hdlc Configuration Commands; Link-Protocol Hdlc; Timer Hold - H3C SR8800 Command Reference Manual

HDLC configuration commands

link-protocol hdlc

Syntax
link-protocol hdlc
View
POS interface view
Default level
2: System level
Parameters
None
Description
Use the link-protocol hdlc command to specify HDLC as the link layer protocol of a POS interface.
HDLC can carry network layer protocols such as IP and IPX.
The default link layer protocol of an interface is PPP.
Related commands: timer hold.
Examples
# Specify HDLC as the link layer protocol of POS 7/1/2.
<Sysname> system-view
[Sysname] interface Pos 7/1/2
[Sysname-Pos7/1/2] link-protocol hdlc

timer hold

Syntax
timer hold seconds
undo timer hold
View
POS interface view
Default level
2: System level
Parameters
seconds: Link status polling interval (in seconds), in the range of 0 to 32767.
Description
Use the timer hold command to set the link status polling interval on a POS interface.
Use the undo timer hold command to restore the default.
49