Wlan Access Configuration Task List; Specifying A Country Code - H3C MSR Series Configuration Manual

Figure 5 Network diagram
AP
For an AP with two radios, you can configure one radio as a workgroup bridge and configure the
other radio to provide normal access services.
As shown in
services. Clients associated with Radio 2 can access the network through the workgroup bridge
Radio 1.
Figure 6 Dual-radio AP in workgroup bridge mode
AP

WLAN access configuration task list

Task

Specifying a country code

Configuring a WLAN service template
Configuring WLAN parameters
Configuring radio parameters
Specifying a country code
A country code identifies the country in which you want to operate radios. It determines
characteristics such as operating power level and total number of channels available for the
transmission of frames. Set the valid country code or area code before configuring an AP.
The country code for North American models cannot be modified and that for other models can be
modified at the CLI.
To specify the country code:
Step
1. Enter system view.
Workgroup Bridge
Figure 6, Radio 1 operates as a workgroup bridge, and Radio 2 provides normal access
Radio 2
Radio 1
Workgroup Bridge
Hub
Client
Command
system-view
12
PC
Printer
Client
Description
Required.
Required.
Optional.
Required.
Remarks
N/A