Replacing The Axis-4 Gearbox - ABB CRB 1300 Product Manual

5.7.4 Replacing the axis-4 gearbox

Location of the axis-4 gearbox
The axis-4 gearbox is located as shown in the figure.
xx2000001489
Required spare parts
Spare part
Gear unit, axis 4
O-ring on circular spline side, axis
4
O-ring on flexible spline side, axis
4
Timing belt, axis 4
Mechanical stop, axis 4, flange
Mechanical stop, axis 4, slider
Process hub with lamp unit (CP/CS
and air hose, with Ethernet)
Multi-color lamp unit (16 mm)
Product manual - CRB 1300
3HAC083111-001 Revision: B
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 1300 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2022-2023 ABB. All rights reserved.
5.7.4 Replacing the axis-4 gearbox
Article number Note
3HAC073084-001
3HAC061327-021 Used with protection class IP67.
Replace if damaged.
3HAC061327-017 Used with protection class IP67.
Replace if damaged.
3HAC065806-001
3HAC065805-001 Replace if damaged.
3HAC065804-001 Replace if damaged.
3HAC085071-001
3HAC081993-004
5 Repair
Continues on next page
631