ABB CRB 1300 Product Manual page 296

Hide thumbs Also See for CRB 1300:

Table of Contents

5.4.2 Replacing the swing

Supporting the lower and upper arms with roundslings

Continues on next page

Remove the swing support.

If the lower arm support is hard to loosen from

the swing, use a plastic hammer to knock on the

lower arm support lightly.

The lower and upper arms include the lower arm, housing, extender unit (only

for CRB 1300-7/1.4 and ), tubular and tilt unit.

Make sure that all supplies for electrical power,

hydraulic pressure, and air pressure are turned

Run two roundslings between the housing and

the lower arm.

The lower and upper arms weighs 38 kg.

All lifting accessories used must be sized accord-

xx2000001684

Roundsling, 1.7 m (2 pcs), Lifting

capacity: >70 kg

xx2000001685

Product manual - CRB 1300

3HAC083111-001 Revision: B

Troubleshooting