3
4
5
6
7
Removing the lower arm support
1
Product manual - CRB 1300
3HAC083111-001 Revision: B
Action
Loosen the screws and move the motor slightly
to slacken the timing belt.
Remove the timing belt from its groove on the
motor.
Remove the screws and washers.
Carefully lift out the motor.
Remove the timing belt.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
© Copyright 2022-2023 ABB. All rights reserved.
5.5.2 Replacing the housing and extender unit
Note
xx2000001604
xx2000001605
xx2000001669
xx2000001670
Note
5 Repair
Continued
Continues on next page
391