ABB CRB 1300 Product Manual page 203

8
9
10
Filling oil into the axis-2 gearbox
Use this procedure to refill the gearbox with oil.
Refilling oil to axis-2 gearbox
1
2
3
Product manual - CRB 1300
3HAC083111-001 Revision: B
Action
Drain the gearbox oil.
Remove and clean the pipe after the oil is
drained.
Note
There will be some oil left in the gearbox
after draining.
Refit oil plugs.
Action
WARNING
Handling gearbox oil involves several
safety risks, see Gearbox lubricants (oil or
grease) on page 29.
CAUTION
The gearbox can contain an excess of
pressure that can be hazardous. Open the
oil plug carefully in order to let the excess
pressure out.
Open the upper oil plug.
Note
The lower oil plug has to be closed; other-
wise, the oil may leak before required oil
amount is filled.
© Copyright 2022-2023 ABB. All rights reserved.
4 Maintenance
4.7.3 Changing oil, axis-2 gearbox
Note
Note
Draining is time-consuming.
Elapsed time varies depending on the
temperature of the oil.
Tightening torque: 10 Nm
Note
xx2000001518
A Oil plug, opened
B Oil plug, closed
Continues on next page
Continued
203