ABB CRB 1300 Product Manual page 289

Separating the cable package from the tubular
1
2
3
Removing the process hub
1
2
Product manual - CRB 1300
3HAC083111-001 Revision: B
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
Remove the first semicircular bracket that fixes
the cable package.
Remove the second semicircular bracket from the
tubular.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
Remove the screws and carefully open the cover.
CAUTION
There is cabling attached to the cover. The cover
cannot be removed completely until the connect-
ors are removed.
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.4.2 Replacing the swing
Continued
Note
xx2000001748
xx2000001749
Note
xx2200001000
Continues on next page
289