ABB CRB 1300 Product Manual page 345

Hide thumbs Also See for CRB 1300:

Table of Contents

Product manual - CRB 1300

3HAC083111-001 Revision: B

When separating the motor from the gearbox,

there may be pressure present in the gearbox,

causing lubricant to spray from the opening. Be-

fore proceeding, please read the safety informa-

tion in the section

Gearbox lubricants (oil or

grease) on page

Removing motors will release axes. This means

the axes can fall down.

Make sure axes are well supported before remov-

Cut the cable strap.

Remove the cable bracket.

Access the screws and washers securing the axis-

2 motor from the swing support.

5.5.1 Replacing the lower arm

xx2000001624

xx2000001625

xx2000001627

Continues on next page

Troubleshooting