ABB CRB 1300 Product Manual page 364

5 Repair
5.5.1 Replacing the lower arm
Continued
Securing the cable package in the swing
1
2
3
Continues on next page
364
Action
Route the cable package up into the lower arm.
Make sure that the the air hoses are facing outside
in the axis-2 cable protector, see the figure as a
guidance for the cable twisting way.
Refit the cable brackets.
Refit the axis-2 cable protector.
© Copyright 2022-2023 ABB. All rights reserved.
Note
xx2000001746
Screw: M4x8 12.9 Lafre
2C2B/FC6.9 (2 pcs for each bracket
on cable package and 2 pcs on
swing)
Tightening torque: 2.6 Nm
xx2100001466
xx2000001557
Screw: M4x8 12.9 Lafre
2C2B/FC6.9 (2 pcs)
Tightening torque: 2.6 Nm
xx2000001556
Product manual - CRB 1300
3HAC083111-001 Revision: B