ABB CRB 1300 Product Manual page 252

5 Repair
5.3.2 Replacing the SMB unit
Continued
4
Removing the SMB unit
1
2
3
Refitting the SMB unit
Use these procedures to refit the SMB unit.
Refitting the SMB unit
1
Continues on next page
252
Action
Remove the battery pack by cutting the cable
strap.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit read the safety information in section
unit is sensitive to ESD on page
Remove the screws.
Action
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit read the safety information in section
unit is sensitive to ESD on page
© Copyright 2022-2023 ABB. All rights reserved.
Note
xx2000001506
Note
The
49.
xx2000001507
Note
The
49.
Product manual - CRB 1300
3HAC083111-001 Revision: B